24
TAPE TIPS
Preventing Accidental
Erasure
Cassette tapes have two erase-
protection tabs
æ
one for each side.
To protect a recording from being ac-
cidentally recorded over or erased,
use a screwdriver to remove one or
both of the cassette tape’s erase-
protection tabs.
If you want to record on a tape side af-
ter you have removed the erase-
protection tab, place a piece of strong
plastic tape over that side’s erase-
protection hole.
Notes:
• Be sure you cover only the hole
originally covered by the erase-
protection tab.
• Removing the erase-protection
tabs does not prevent a bulk
eraser from erasing a cassette
tape.
show Side A erase protection tab
being removed with a screwdriver
Erasing a Cassette Tape
To erase a previously recorded sec-
tion of a tape, simply record over it. To
erase the entire cassette tape, let the
tape record to the end with no source
playing.
You can quickly erase both sides of a
cassette tape using a bulk tape eraser
(such as Cat. No. 44-232, not sup-
plied), available at your local Ra-
dioShack store.
Restoring Tape Tension and
Sound Quality
After you play a cassette tape several
times, the tape might become tightly
wound on the reels. This can cause
playback sound quality to deteriorate.
To restore the sound quality, fast-
forward the tape from the beginning to
the end of one side, then completely
rewind it. Then loosen the tape reels
by gently tapping each side of the cas-
sette’s outer shell on a flat surface.
Caution:
Be careful not to damage
the cassette when tapping it. Do not
touch the exposed tape or allow any
sharp objects near the cassette.
13-1296.fm Page 24 Wednesday, July 14, 1999 7:16 PM
Comments to this Manuals